Programmed Playback (Audio Cds); Programmed Playback (Cd-Rom); Shuffle And Repeat - Arcam DiVA DV78 Handbook

Because of differences in the many MP3 and WMA encoders
available, we recommend that you conduct a test recording
before transferring large numbers of MP3 files to CD-R or
CD-RW for subsequent playback on the DV78.

Programmed playback (Audio CDs)

Press on the remote control to open the 'Programme'
PROG
menu. Playback must be stopped first.
Play
1: 1 6: 6 11: 11
2: 2 7: 7 12: 12
3: 3 8: 8 13: 13
4: 4 9: 9 14: – –
5: 5 10: 10 15: – –
13 Track(s) on this disc.
Enter title number.
The bottom of the screen shows the number of tracks present
on the disc. Below this is an information line, giving relevant
information for the cursor position.
You can enter a sequence of up to 20 tracks for programmed
playback. If you enter data that is invalid for the current disc,
the field will be erased automatically.
To program the player, highlight the first entry (using the cursor
pad on the remote control), then press the number of the track
you want to play first. To enter a second track, move down,
then type the number of the second track to play, etc. To enter
a track number greater than 9, press the two digits sequentially
(e.g., for track 10, first press , then press
1
To play the programme you have entered, highlight the
button on the screen and press
OK
on the front panel display and the programmed sequence
begins.
If you make a mistake while programming, you can clear a
single field by highlighting it and pressing
fields at once, highlight the 'CLEAR ALL' button on the screen
and press .
OK
To stop the programmed sequence and return to normal
playback, select the 'PLAY' button in the programme menu with
no programme specified. This clears programme mode and
causes normal playback order to be resumed.
Note that in programmed playback mode, skipping track
forward or back skips forward or back through the programmed
sequence.
The player returns to 'Browse' mode if no programme has been
entered when is pressed for a second time.
PROG

Programmed playback (CD-ROM)

Pressing the button on the remote control stops playback
PROG
(if active) and changes the player mode to 'Programme' mode
(as indicated at point (2)).
Navigating the directory tree is the same as described earlier
for 'Browse' mode. Files from any location on the disc may
be added to the playlist by moving the cursor to the file, then
pressing on the remote control. Files that are present in the
OK
playlist are shown with a light blue highlight.
To remove a file from the playlist, move the cursor to the file
and press . The blue highlight disappears from the file,
OK
indicating that the file is no longer in the playlist. To remove all
files from the playlist, press
CLEAR
When you have entered the programme to your satisfaction,
press the button again. This changes the display to
PROG
show the programmed list ('Playlist' mode) and playback starts
automatically.
Playback can be stopped and started using the
keys, as normal. To stop the programmed sequence and return
to normal playback, press the
stops playback and changes the player to 'Browse' mode.

Shuffle and Repeat

Note that this section is valid for audio-CDs only.
Clear All
Repeat
16: – –
Press the
17: – –
18: – – the repeat options. 'Track' or 'Disc' (i.e. all) repeat are available.
19: – –
20: – – When a track repeat is selected, the loop symbol on the front
panel display is illuminated and the current track is repeated.
If a disc repeat is selected, the loop symbol and 'ALL' are
illuminated and the entire disc is repeated.
To cancel repeat, press the
on the front panel display are no longer illuminated.
Shuffle
Press the
shuffle play.
The 'RAND' (random play) indicator shows on the display, and
the tracks are played in random order.
To cancel random play, press the
time.
Note that Repeat and Shuffle cannot be set at the same time.
).
0
PLAY
. The 'PROG' indicator shows
. To clear all the
CLEAR
on the remote control.
PROG
button on the remote control to cycle throught
RPT
button until the Repeat symbols
RPT
button on the remote control to activate
P MODE
P MODE
NOTE: If a programmed sequence is shuffled using the
button on the remote control, pressing
P MODE
will not 'unshuffle' the programme.
and
STOP PLAY
button for a third time; this
button for a second
again
P MODE
DV78
19