Configuring A New Ssh Session - HP Neoware c50 - Thin Client System Manual

5.8.2 Configuring a new SSH session

Label
Username
Address/Port
Run application
Connect via
Compression
X11 connection
forwarding
Fork into background Determines if the SSH Client will be operated in background mode.
Reset known hosts
database
40
Determines the name of the session
Lets you specify a username
Lets you enter the server's address and port to which a session is connected.
Determines the application and its path which should be started when the
SSH tunnel has established.
Determines the network interface which is used for this session.
Determines if datacompression will be used or not.
Determines if a X11 session will be forwarded through a
SSH tunnel.
Deletes all host keys