Pushing A Pxe Image To A Client - HP Neoware c50 - Thin Client User Manual

Advanced Tasks
Pushing a PXE
Image to a Client
150 Images
You can push (write) a PXE image stored in an FTP Repository to
any client managed by HP Device Manager, as long as it contains
enough Flash storage. This is achieved using the
template.
To push a PXE image to a device:
Make sure the BIOS settings of the client device to which you
1
want to push an image are as described in the section "Client
BIOS Settings for PXE" on page 146.
In the Management Console, display the OS tab containing the
2
name of the client in its
Select the
Imaging
3
click on the
_PXE Imaging
.
Editor
Select the FTP Repository where the PXE image file resides in
4
the
FTP Repository
Select
Push PXE image to device
5
.
Device Tree
tab in the
Task Templates
template to display the
list box.
as the
_PXE Imaging
pane, then double-
Template
to perform.
Action