Pre-Assigning Devices To Groups - HP Neoware c50 - Thin Client User Manual

Using the HP Management Console
Pre-assigning
Devices to Groups
80 Grouping Devices
Dragging and dropping devices:
Ensure that the device tree has at least one grouping property
1
selected in the grouping scheme.
Click on a device, hold down the mouse button then drag the
2
device to another group on the device tree.
Note: Devices can only be dragged between groups of the same
level on the device tree, and groups being dragged between must
have a grouping property.
Release the mouse button and the grouping property for the
3
device will be set to that of the group being dropped into. The
device will then be re-grouped under the target group.
You can pre-assign a device to a specific group using the
dialog on the device itself. On the
figuration
Static Custom Groups
specify a value. Once the device agent has registered with the server,
you will see the device placed in the specified pre-assigned group
folder if you choose the global manual grouping scheme (click the
button and select
Group By
> "Manual Group" and
Add Group Name
>
Manual Group
Agent Con-
tab, select
Group Use
.)
_global