Changing Connection Settings - HP Neoware c50 - Thin Client User Manual

Changing Connection Settings

HP thin client devices are designed to access servers or applications
through pre-defined ICA, RDP, terminal emulation or Web browser
connections. HP Device Manager enables you to copy these pre-
defined connection settings from one thin client to others of the
same model and operating system type.
Important: Before copying the connection settings of a device, you
must make sure that each connection is properly configured and
tested on the network where the connections will be used.
Configure a thin client device with the required connection
1
settings and ensure that the connections work on the network
where they will be used.
Run the Management Console and display the name of the
2
device with the correct connections in the device tree.
Select the
Connections
3
click on the
_Get Connection Configuration
the
Template Editor
Use the check boxes to indicate which connection settings to
4
retrieve from the device.
Enter a name for the template which will be created to store the
5
connection settings.
tab in the
Template Pane
.
Changing Connection Settings
Common Tasks
, then double-
template to display
119