Pulling A Pxe Image From A Client - HP Neoware c50 - Thin Client User Manual

Pulling a PXE
Image From a Client
You can pull (copy) a PXE image from any client managed by HP
Device Manager and store it as a .img file in the Repository so that it
can be pushed (written) to other clients. This is achieved using the
template.
_PXE Imaging
To pull a PXE image from a device:
Make sure the BIOS settings of the client device from which you
1
want to pull an image are as described in the section "Client
BIOS Settings for PXE" on page 146.
In the Management Console, display the OS tab containing the
2
name of the client in its
Select the
Imaging
3
click on the
_PXE Imaging
In the
Template Editor - Imaging
4
where the image will be stored.
tory
Set the to
Action
5
.
Device Tree
tab in the
Task Templates
template.
dialog, select the
Pull PXE image from device
Advanced Tasks
pane then double-
FTP Reposi-
.
Images 147