The stabilizer feet help prevent the rack from tipping over when a system is pulled out of
the rack with the slide assemblies fully extended. See the documentation provided with the
rack cabinet for instructions on installing and anchoring the stabilizer feet.
Recommended Tools and Supplies
You may need the following to install the system in a four-post rack cabinet:
•
#2 Phillips screwdriver
•
Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
RapidRails Rack Kit Contents
The RapidRails rack kit includes the following items (see Figure 1-1):
•
One pair of RapidRails slide assemblies
•
One cable-management arm
•
One cable tray
•
Two stop blocks
•
Releasable tie wraps (not shown in Figure 1-1)
F i g u r e 1 - 1 .
slide assemblies (2)
1-4
Rac k I n s t a l l a t i o n G u i d e
R a p i d R a i l s R a c k K i t C o n t e n t s
cable-management arm
cable tray
stop blocks (2)