Figure - Dell PowerVault 725N Rack Installation

Push the tab on the remaining free end (the front) into a mating latch on the inner
3
segment of the slide assembly (see Figure 1-9).
The latch clicks when locked.
F i g u r e 1 - 9 .
latch on end of slide
assembly
latch on inner segment
of slide assembly
Install a stop block on the end of the opposite slide assembly (see Figure 1-9).
4
The stop block prevents the backward travel of the cable-management arm and
supports the weight of the arm with its load of installed cables.
1-14
Rac k I n s t a l l a t i o n G u i d e
I n s t a l l i n g t h e C a b l e - M a n a g e m e n t A r m
tab on front end
cable tray
stop block
tab on back end
cable-management arm