Dell PowerVault 725N Rack Installation page 32

F i g u r e 1 - 1 8 .
C o n f i g u r a t i o n
two-post open-frame rack
12-24 x 0.5-inch pan-
head Phillips screws
(4 per slide)
Installing the System in the Rack
CAUTION: If you are installing more than one system, install the first system in
the lowest available position in the rack.
NOTE: The procedure for installing a system into a rack is identical for flush-mounted
and center-mounted slide assemblies.
CAUTION: Never pull more than one component out of the rack at a time.
1-26
Rac k I n s t a l l a t i o n G u i d e
I n s t a l l i n g t h e S l i d e A s s e m b l i e s f o r F l u s h - M o u n t
shoulder screw on
system
system release
latch
joined bracket
slide assemblies (2)
slide release latch