Installing The Versarails Slide Assemblies - Dell PowerVault 725N Rack Installation

Ensure that the rails are mounted at the same vertical position on each side of the
5
rack.
F i g u r e 1 - 5 . I n s t a l l i n g t h e R a p i d R a i l s S l i d e A s s e m b l i e s
front of rack

Installing the VersaRails Slide Assemblies

At the front of the rack cabinet, position one of the VersaRails slide assemblies so that
1
its mounting-bracket flange fits between the marks or tape (or numbered location) on
the rack (see Figure 1-6).
The three holes on the front of the mounting bracket should align with the three holes
between the marks you made on the vertical rails (or the three holes in the numbered
location you selected).
slide assemblies (2)
push button
mounting hook
mounting-bracket
flange
support tab
Rack Installation Guide
1-9