Table of Contents
Advertisement
Servicing and Upgrading an IP4700
3
Installing a Storage
Processor
IP4700 Installation and Service Guide
3-16
To install a storage processor:
CAUTION
!
Handle a storage processor gently and use an ESD wristband.
1. Remove the new storage processor from its static-free packaging.
2. Pull the release levers out and away from the storage processor.
3. Align the storage processor with the guides on the sides of the
enclosure. Gently slide the storage processor into the enclosure,
while supporting it at its sides.
4. Close both release levers simultaneously to fully seat the storage
processor.
5. Tighten the two captive screws securing the storage processor to
the enclosure.
6. Reconnect all cables and Ethernet connectors to the storage
processor.
Advertisement
Table of Contents
