Technical Specifications and Operating Limits
A
SPS Technical Specifications
SPS Interface
Power
Specifications
Power Consumption
IP4700 Installation and Service Guide
A-8
This section lists the technical specifications and operating limits for
the Standby Power Supply (SPS).
Type
Half-duplex RS-232
Baud rate
9600
Parity
None
100 V ac to 240 V ac -10%/+10%
Voltage
single-phase, 47 Hz to 63 Hz; auto-ranging
800 watt 8.5 A max. at 100 V ac input
Current draw
(when fully loaded)
Input power
Output Power
Chassis power inlet
Chassis power outlet
Charge times
Transfer time
800 watts: (850 watts maximum)
800 watts: (800 watts maximum)
IEC 320-C14 Appliance Connector (panel mount)
EC 320-C13 Appliance Connector (panel mount)
After full power outage, 45-60 minutes maximum
After off-line storage, 2 hours approximately
20 ms maximum