Table of Contents
Advertisement
5. Use two screws to fasten the left SPS's attachment bracket to the
tray. See Figure 4-5.
6. Use four screws to fasten an attachment bracket to the left and
right SPS, as shown in Figure 4-5.
7. Use two screws to fasten the right SPS's attachment bracket to the
mounting flange on the tray. See Figure 4-5.
Screw
(2)
Screw
(4)
Securing the Two SPS Units to the Cabinet
Figure 4-5
The Standby Power Supply (SPS)
Middle
attachment
bracket
EMC1693
Installing an SPS in a Rackmount Tray
4
4-7
Advertisement
Table of Contents
