Table of Contents
Advertisement
Installing an IP4700
2
IP4700 Installation and Service Guide
2-18
SPS A
Connecting Power Cords to SPS A and B
Figure 2-16
7. Turn on each supply's power as shown in Figure 2-18.
NOTE: The only power switches on an IP4700 are those on the power
supply, which are normally covered by the drive fan pack. As a result, an
IP4700 is always active once powered up.
When ac power is initially applied to the file server, the disk drives
power up and spin up in a specified sequence. The maximum delay is 48
seconds for the IP4700 and 84 seconds for a DAE. The same delays occur
when you insert a drive while the file server is powered up.
Rear of cabinet
Power
supply A
Power
supply B
SPS B
EMC1465
Advertisement
Table of Contents
