Cabinet Mounting; Figure 2: Netaxs™ Nx4S1 Panel Cabinet, Front View - Honeywell NetAXS NX4S1 Installation Manual

NetAXS™ NX4S1 Installation
Installation
14.Attach the negative (black) Power Supply-to-Battery cable to the negative (black) battery
15.For panels using the Ethernet connection, the cable clamp (HAS part number 3-000342) must

4.1 Cabinet Mounting

The following five figures show the back, top, bottom, right, and left views of the NetAXS™ panel
cabinet. Each view includes the dimensions and knockout placement that you will need to mount the
cabinet. All dimensions are given in inches. See
entries into the cabinet.
Figure 2: NetAXS™ NX4S1 Panel Cabinet, Front View
31/32" (25 mm)
2 30/32"" (75 mm)
12 1/16" (306.25 mm)
1/4" (6.25 mm) Ø
17 23/32" (450 mm)
10
www.honeywell.com
terminal.
be used for the panel to pass the FCC Part 15 Class B requirements. Snap the clamp around any
portion of the Ethernet cable that is inside of the enclosure.
0
Table 1 on page 14 for dimensions of the conduit
1/4" (6.25 mm)
3/8" (9.375 mm) diameter
(3 holes)
1 23/32" (43.75 mm) diameter knockout
0
2 30/32" (75 mm)
15 3/4" (400 mm)