Honeywell 2202 User Manual

Honeywell 2202 User Manual

Digital steel fire & security safe

Advertisement

Models 2202 & 2204
DIGITAL STEEL FIRE & SECURITY SAFE
Read this manual carefully and never store it inside the safe!

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell 2202

  • Page 1 Models 2202 & 2204 DIGITAL STEEL FIRE & SECURITY SAFE Read this manual carefully and never store it inside the safe!
  • Page 2: Package Contents

    Models 2202 & 2204 Digital Steel Fire & Security Safe PACKAGE CONTENTS 1 – Digital Steel Fire & Security Safe 1 – Operation Manual 4 – “AA” Batteries 2 – Override Access Keys 1 – Silica Gel Pack 1 – Removable Drawer Tray...
  • Page 3: Setup And Operation

    SETUP & OPERATION STEP 1: INSTALL BATTERIES IMPORTANT: The starter batteries included with this product are for testing purposes only and should be immediately replaced with new alkaline or lithium batteries. It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.
  • Page 4 SETUP & OPERATION STEP 2: UNLOCK AND OPEN THE SAFE 1. Lift up on the protective dust cover to gain access to the keypad 2. On the keypad, press “ENTER” then “7 7 7 7” then “ENTER” again. 3. If the correct code has been entered, a musical code will chime, the green LED will blink and the lock will click...
  • Page 5 SETUP & OPERATION STEP 3: PROGRAM NEW USER CODES 1. With the door open, press the small black button (B) located near the inside center of the door. 2. You will hear a musical chime and the small green LED will glow. NOTE: If the green LED stops glowing, you need to press the black button and start again.
  • Page 6: Security Features

    SECURITY FEATURES SECURITY LOCKOUT PERIOD: If an incorrect code is entered, the LED’s will blink and a special two-tone alarm will sound. You should then re-enter the proper code. If an incorrect code is entered 4 times, the safe will enter a security lockout period of about 5 minutes.
  • Page 7: Permanent Installation

    PERMANENT INSTALLATION SECURING YOUR SAFE TO THE FLOOR This safe includes a special knockout insert located on the bottom which allows permanent and secure installation to the floor. Mounting hardware is not included and depending on the type floor (Concrete or wood) it should be purchased separately from your local retailer.
  • Page 8 ORDERING NEW / REPLACEMENT KEYS The following information is required to order keys: 1. PROOF OF OWNERSHIP (1 of 2 Options Below) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY! Copy of sales receipt showing Store, Date & Product • Description.
  • Page 9 LIFETIME AFTER-FIRE REPLACEMENT GUARANTEE If this Honeywell UL classified fire resistant product was purchased from LH Licensed Products, Inc. (“LHLP”) and is damaged by fire at any time while still owned by you (the original owner), LHLP will ship a free replacement if you send the following to Customer Service, LH Licensed Products, Inc., 860 E.
  • Page 10: Consumer Assistance

    Manufactured by LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. Rev. 02/13/2014...

This manual is also suitable for:

2204

Table of Contents