Table of Contents
Advertisement
Uninstalling Your Scanner
Step 1: Uninstalling the DocuMate Software
DocuMate 520 Scanner Installation Guide
Problem: The status light is blinking. What does
this mean?
The status light indicates the current state of the scanner.
Descriptions of the most common patterns are listed below.
Contact Xerox Technical Support if you experience a different
blinking pattern.
•
Blinking green: indicates the scanner is preparing to scan.
•
Blinking amber, 1 long + 6 short blinks: indicates a problem
with the status light itself. Contact Xerox Technical support.
•
Blinking amber, 1 long + 7 short blinks: indicates a scanner
lock error. Make sure the lock on the bottom of the scanner is in
the unlocked position.
•
Blinking amber, 1 long + 11 short blinks: indicates a paper
jam. Refer to "Clearing Paper Jams" on page 56.
To uninstall your DocuMate 520 scanner, remove the scanner
software first, and then remove PaperPort, or other scanner
software.
1. On the Windows taskbar, click Start, point to Settings, and
then click Control Panel.
2. Double-click the Scanner and Cameras icon.
•
For Windows 98SE or 2000, click the Devices tab, select
the XEROX DocuMate 520 scanner, and click the Remove
button to remove the scanner from the list. Click OK.
•
For Windows ME or XP, right-click the XEROX DocuMate
520 icon, and select Delete to delete the scanner from the
list.
3. Unplug the USB cable from the scanner.
4. Click the Back button in the toolbar to go back to the Control
Panel.
5. Double-click the Add/Remove Programs icon.
•
Windows 98SE or ME: The Add/Remove Programs
Properties window opens. Select the Install/Uninstall tab.
•
Windows 2000 or XP: The Add or Remove Programs
window opens. Make sure the Change or Remove option is
selected.
Maintenance
61
Advertisement
Table of Contents
