Table of Contents
Advertisement
Scanning from Buttons
About the Buttons on the Button Panel
Configuring the Scanner and Screen Buttons
About the Configuration Dialog Box
20
2. Close the cover and click the scanner icon on the Windows
taskbar.
3. On the scanner button panel, click one of the scan buttons.
The scanner starts scanning the item. Messages about the
scanning appear above the Windows taskbar and the progress
window shows the image as it is scanned. When the scan is
complete, the scanned image appears in the destination
application.
The icons on the buttons indicate the destination application for the
scanned image. For example, in the illustration above, the icon on
the email button is for the email application, MS Outlook Express.
When you click the email button, the item is scanned, and then MS
Outlook Express opens. In this case, the scanned image
automatically becomes an attachment to send with an email
message.
A question mark icon on a button means your computer does not
have an application that corresponds to that button's functions. For
example, if your computer does not have an email application, the
Email button will have a question mark icon on it.
When you first connect your scanner to a computer, the scanner's
software configures each button with appropriate settings. Using
the Configuration dialog box, you can create new configurations
with settings that meet your specific scanning requirements.
The Configuration dialog box shows the current settings for each
button on the scanner and screen panel.
The tabs across the top of the dialog box correspond to the
buttons. Clicking a tab shows the current settings for the
corresponding button on the scanner.
DocuMate 520 Scanner Installation Guide
Advertisement
Table of Contents
