Table of Contents
Advertisement
DocuMate 520 Scanner Installation Guide
8. Click the Scan button on the Scan pane.
The scan window opens. Use this window to select scanning
options and start the scanner.
9. From the Paper Source drop-down list, select Flatbed or
Document Feeder (if you are going to use the ADF).
If you selected Document Feeder, select a paper size from the
Page size drop-down list.
NOTE:
If your computer is running Windows ME, the ADF can
scan only one page at a time.
10. Click the button most appropriate for the item you're scanning.
11. Click Preview if you want to preview the image before
scanning.
The image is displayed on the right side of the window.
NOTE:
If you preview when scanning a stack of documents, the
first page of the stack feeds through the ADF for the preview.
After adjusting the scanner settings, replace that page on the
stack so it is scanned with the rest of the pages.
12. Adjust settings of the previewed image as desired:
•
Change the button selection for the type of image.
•
Adjust the custom settings; refer to the next section, "Fine
Tuning Your Scans".
•
Change the size of the scanned image. To do this, click and
hold the mouse pointer over one of the four sizing-boxes on
the corners of the previewed image. Then drag the box to
increase or decrease the size of the image.
Scanning from PaperPort
53
Advertisement
Table of Contents
