Table of Contents
Advertisement
Reversing the Image
Invert
Mirror
DocuMate 520 Scanner Installation Guide
Manually Setting the Width and Length
The output dimensions at the bottom of the Scan Manager show
the Width and Length of the scan area. You can set the area by
typing numbers into those boxes.
To manually set the width and length:
1. Click in the Width or Length box and type a new dimension.
The scan area box changes to reflect the new size.
2. To maintain the same width to length ratio, click the Lock
Scaling icon next to the dimension.
With the Lock Scaling locked, when you type a new width or
length, the other setting changes so the relative size of the
scan area remains constant.
The Scan Manager has an Invert button and a Mirror button for
reversing the scanned image.
Invert reverses the black and whites or the colors of an image.
Mirroring flips the image 180 degrees.
Scanning from PaperPort
41
Advertisement
Table of Contents
