Table of Contents
Advertisement
DocuMate 520 Scanner Installation Guide
6. Click Settings to view and change the format for the scanned
item's file name and the file type. The default file type for
documents is .pdf and the default for photographs is .jpg.
7. Use the Single page items check box as follows:
•
When the check box is selected, pages are scanned and
placed on the PaperPort desktop.
•
When the check box is not selected, pages are scanned
but are not placed on the PaperPort desktop until you close
the Scan Manager and indicate the scanning job is finished.
8. Click the Scan button at the bottom of the Scan pane.
The Scan Manager opens. Use the Scan Manager to select
scanning options and to start the scanner.
9. From the Scan Method drop-down list, choose whether you are
going to scan a single item (Flatbed) or a stack of items (ADF).
Choose Flatbed to
scan a single item
Choose ADF to scan a
stack of documents
Click Preview to check
the image
Click Scan when you're
ready to scan
10. If you want to see what the scanned image will look like before
scanning its final image, click the Preview button.
The scanner scans a preview of the item and displays it in the
Scan Manager. You can now use the options on the Scan
Manager to fine-tune the image. For example, to adjust the
brightness, drag the Dark/Light slider. For details on adjusting
images, see "Adjusting the Image with the Scan Manager" on
page 35.
NOTE:
If you preview when scanning a stack of documents, the
first page of the stack feeds through the ADF for the preview.
After adjusting the scanner settings, replace that page on the
stack so it is scanned with the rest of the pages.
11. To preview the item with the new settings, click the Preview
button again on the Scan Manager.
Scanning from PaperPort
33
Advertisement
Table of Contents
