Table of Contents
Advertisement
Creating New Configurations
DocuMate 520 Scanner Installation Guide
Each scanner button has preset configurations that you cannot
change. These preset configurations are shown in the Select
Configuration list on the Configuration dialog box. If you want to
scan with settings other than those offered by the preset
configurations, you must first create a new configuration and then
use it to scan. Your new configuration is saved in the Select
Configuration list so that you can use it again. You can also change
the settings on configurations that you create.
Note that each new configuration applies to both the scanner
button and destination application that you select when creating
the configuration.
To create a new configuration:
1. From the Windows Start menu choose Program Files, point to
ScanSoft PaperPort 9.0, and then DocuMate Configure.
The Configuration dialog box opens.
2. Click the tab of the button that you want to associate with the
new configuration.
3. Select the destination application that you want to associate
with the new configuration.
4. Click New to start creating a new configuration.
You can also click Copy to copy a preset configuration and
change its settings and save it as a new configuration.
5. On the New Scan Configuration dialog box, type a name for
your new configuration.
Scanning from Buttons
25
Advertisement
Table of Contents
