Installation - Zanussi ZOD370 User Manual

Problem
The oven is not cooking evenly.
The oven light fails to illuminate.
The oven fan is noisy.
The oven temperature is too high or too
low.

Installation

• The set-up of the electrical installation is arranged so
that the appliance can be isolated from the mains with
a minimum 3 mm all-pole contact separation.
Suitable isolation devices include, for example, circuit
breakers, fuses (screw type fuses are to be removed
from the holder), RCDs and contactors.
• Anti-shock protection must be provided by the instal-
lation.
• The built-in unit must meet the stability requirements
of DIN 68930.
18
Check that the appliance is correctly installed and is level.
Check that the recommended temperatures and shelf positions are being
used.
The oven light bulb may need replacing.
Check that the oven is level.
Check that the shelves and bakeware are not vibrating in contact with the
oven back panel.
Check that the recommended temperatures and shelf positions are being
used. Be prepared to adjust the temperature up or down slightly to achieve
the results you want.
• Built-in cookers and cooking surfaces are equipped
with special attachment systems. For safety reasons,
they must only be combined with appliances from the
same manufacturer.
The use of heat protection strips is prohibited for cookers
and ovens with Pyrolytic Cleaning, if the recess has a rear
wall and closed ground-level compartment.
However installation is possible with a ground-level com-
partment that has been shortened by at least 20 mm and
which has base ventilation of the same cross-section.
Possible Solution