Fuser Lamp Removal - Lexmark 4049LMO - Optra Lx+ B/W Laser Printer Service Manual

4049-XXX

Fuser Lamp Removal

CAUTION: THE TEMPERATURE OF THE HOT ROLLER IS 150-
230 ° C (302-446 ° F). USE EXTREME CAUTION WHEN REMOV-
ING THIS UNIT. BEFORE YOU SERVICE THIS UNIT, ALLOW THE
MACHINE TO COOL FOR 5 MINUTES.
Note: The fuser lamp is a glass heater. Do not touch the lamp with
your hands; skin oils and acids can reduce the life of the heater
lamp. Use a soft cloth to handle the heater lamp at all times if the
lamp is to be reinserted.
1. Remove the fuser.
2. Remove the right lamp bracket [A].
3. Carefully pull the lamp [B] out to the right, using a soft cloth if
the lamp is to be reinserted.
Install the new lamp with the color-coded end away from the
gear.
Repair Information 4-20