Connecting The Tv Signal Source - HP Media Center m1100 - Desktop PC Getting Started Manual

n
Location and number
of connectors may
vary by model.
24
HP Media Center PC Getting Started Guide

Connecting the TV Signal Source

Connect the signal source for the TV by using the
TV In coaxial connector or the S-video In connector.
Plug the connector of a coaxial cable from your TV
antenna or from your TV cable (wall or set-top box)
into the TV/RF-In (D) connector on the back of the
PC, and then turn the connector to tighten it.
Or
Plug a cable into the S-video In (C) connector on the
back of the PC; use an S-video cable (not provided)
or use the S-video to composite video adapter cable
and the composite video cable. Plug the other end
of the cable into your set-top box or other device
that is providing the signal source for the TV.
You must also plug audio cables (not provided)
from your set-top box into the Audio In right (red)
(A) connector and the Audio In left (white) (B)
connector on the back of the PC, if you are using a
set-top box with S-video or composite video output.
A B C D