Connecting The Tv Signal Source To The Pc - HP TouchSmart Series User Manual

Connecting the TV Signal Source to the PC

NOTE: The number and type of cables required to connect your HP TouchSmart PC may vary by model.
You may need to purchase extra cables separately. Your HP TouchSmart PC may not include all the cables
you need for your computer setup, and the cables included may vary by model.
Use these steps to connect the TV signal source, the FM signal antenna, or video and audio from a set-top
box or DVD player. Some HP TouchSmart PC models have only the TV connector.
Shown below are three different TV tuner connectors your HP TouchSmart PC may include:
TV/In Cable antenna connector only
If your TV tuner looks like this, follow this procedure:
1 Connect the coaxial cable from your TV antenna or TV cable provider to
the TV In connector on the left side of the HP TouchSmart PC.
Or
Plug an S-V/Cable antenna video cable into the S-Video connector in the
front Connectivity Center of the HP TouchSmart PC. Plug the other end of
the cable into your set-top box or other device that is providing the signal
source for the TV.
2 If you are using the S-Video connector, plug audio cables from your set-
top box into the audio left and right connectors in the front Connectivity
Center of the HP TouchSmart PC.
3 If you are using the set-top box, connect the IR emitter cable. See
"Connecting the IR emitter."
FM antenna, TV In, S-Video, Video Composite, left
and right audio connectors
If your TV tuner looks like this, use the following procedure:
1 Connect the coaxial cable from your TV antenna or TV
cable provider to the TV In/Cable/Ant connector on the
left side of the HP TouchSmart PC.
Or
Plug a cable into the S-Video or Video (composite)
connector on the left side of the HP TouchSmart PC; use an
S-Video cable or composite video cable. Plug the other
end of the cable into your set-top box or other device that
is providing the signal source for the TV.
2 If you are using the S-Video or video connector, plug audio
cables from your set-top box into the audio left and right
connectors on the left side of the HP TouchSmart PC.
3 Push the coaxial cable from your FM antenna or signal
provider onto the FM connector on the left side of the
HP TouchSmart PC.
4 If you are using the set-top box, connect the IR emitter
cable. See "Connecting the IR emitter."
TV In
Cable/
antenna
Left
S-Video
Audio In
TV In
Cable/
Composite
antenna
Setting Up the HP TouchSmart PC
Right
Audio In
13