HP Media Center m1100 - Desktop PC Getting Started Manual page 56

52
HP Media Center PC Getting Started Guide
8
Connect the speaker system audio cable plugs
into the connectors on the front of your PC.
The panel display highlights a cable that is
properly inserted in a connector.
Retasking front panel connectors
The microphone connector and the headphone
connector on the front of the PC can be retasked to
perform different functions.
1
Follow steps 1 through 7 of the procedure,
"Using the Audio Wizard."
2
When you plug in a cable, the wizard asks
you to select the device you plugged in from
a list.
3
Close the window.
Disabling digital audio output with Sound Effect Manager (optional)
To disable digital audio output:
1
Follow steps 1 through 6 of the procedure,
"Configuring Audio Output with Sound Effect
Manager" on page 51.
2
Click the Digital Audio button. Select No
digital output (you can also select Digital-in to
Digital-out pass through mode).
9
Close the window.
3
Close the window.
If you select Enable digital audio output, the
microphone volume setting becomes not muted, the
recording source is fixed in Stereo Mix, and if you
place the microphone too close to the speakers,
feedback can occur.