Manual Standby Mode - HP Media Center m1100 - Desktop PC Getting Started Manual

Manual Standby Mode

Putting the PC into standby
You can put the PC in Standby in several ways:
Press the Standby button on the
■
keyboard.
Press the Standby button on the
■
remote control.
Briefly press the On button on the front of the
■
PC. The screen goes dark, and the PC goes
into standby mode. The On button on the front
of the PC has a power indicator light that
flashes when the PC is in standby.
Taking the PC out of standby
When you want to use the PC again, to make the
screen display reappear just as you left it, do one of
the following:
On the front of the PC, briefly press the On
■
button.
On the keyboard, press any key or the
■
Standby button.
Standby mode tips
If the PC does not work properly when you wake it
from standby, reset the PC by pressing and holding
the On button on the front of the PC for
approximately 5 seconds until the PC turns off. Then
turn the PC back on.
Or
1
Click Start
2
Click Turn Off Computer at the bottom of
the menu.
3
Click Stand By.
On the remote control, press and hold the
■
Standby button for 1 or 2 seconds and then,
when the screen display appears, press the
Start button on the remote control.
If you are using Media Center to record TV
programs, put the PC into standby mode (instead of
turning it off or using hibernation) so that the PC can
"wake" at the proper time to record TV programs.
If Live TV or other media is playing in Media Center,
the PC won't go into standby mode automatically.
on the taskbar.
Starting the PC
65