HP Media Center m1100 - Desktop PC Getting Started Manual page 38

n
Your TV must be
connected to the PC to
change the display.
34
HP Media Center PC Getting Started Guide
5
Click the OK button to save changes, and
then click OK again to close the Display
Properties window.
Ge Force FX tab (disabling)
1
Click the Ge Force FX xxxx tab.
2
In the area nView Modes select Single
Display from the drop-down list. In the area
Current display select Analog Display or
Digital Display.
3
Click the Apply button.
Displays tab (disabling)
1
Click the Displays tab. This tab shows a
monitor and a TV. The upper-left corner of
each display icon is a button and a status
indicator. A red corner indicates an inactive
display; a green corner indicates an active
display.
Disconnecting the TV
1
Disable the TV option. See the previous
procedure.
2
Turn off the TV and the PC.
3
Remove the video cable at the TV and the PC.
4
When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
5
Click the OK button to save changes, and
then click OK again to close the Display
Properties window.
2
Click the upper-left corner of the TV icon so it
is red, and then click the upper-left corner of
the monitor icon so it is green. Click the
Apply button.
3
When the PC image appears on the TV