4
Connect the center/subwoofer speaker cable
to the gold (or pink mic) connector that
matches the back of your PC.
3
6
For 3 Connector systems, the pink mic
■
connector functions as a center/subwoofer
speaker line out when a multichannel audio
configuration is activated.
5
Connect the cables to the audio system.
6
Connect the front, rear, and center speakers to
the subwoofer. Refer to the speaker
documentation.
The following diagram shows a typical 5.1 audio installation:
7
Turn on the PC.
8
Plug in the speaker system power.
9
Turn on the speaker system.
S
10
After the speakers are connected to the PC,
configure the audio software for sound output
for your PC model:
■
■
■
3 Connector: See "Configuring Audio
Output with Multi-channel Sound
Manager" on page 48.
6 Connector: See "Configuring Audio
Output with Sound Effect Manager" on
page 51.
Sound Card: See "Configuring Audio
Output with a Sound Card" on page 53.
Configuring Speaker and Sound Options
n
Always turn on the
PC before you turn on
the speaker system.
41