Connecting The Tv Signal Source - HP Media Center m7100 - Desktop PC Getting Started Manual

Connecting the TV Signal Source

Connect the signal source for the TV by using the
TV In coaxial connector or the composite/S-video In
connector.
Plug the connector of a coaxial cable from your TV
or from your TV cable into the TV/Cable Ant
connector on the back of the PC, and then turn the
connector to tighten it.
Or
Plug a cable into the S-video or composite video In
connector on the back of the PC; use an S-video
cable (not provided) or the composite video cable.
Connecting a dual tuner
(Select models only)
If your HP Media Center PC has the dual tuner
option, you must connect a second set of inputs if
you are using a cable or satellite set-top box. If you
are using an antenna or standard cable connecting
the signal is routed to both tuners internally.
Otherwise, connect a second set-top box to the
second set of back-panel connectors
For dual-tuner configurations, both TV sources must
be of the same type: either cable TV, digital cable
TV, satellite TV, or antenna. The TV sources must also
have the same, identical channel lineup; for
Single-tuner TV Source
Dual-tuner option
Plug the other end of the cable into your set-top box
or other device that is providing the signal source
for the TV.
You must also plug audio cables (not provided)
from your set-top box into the Audio In right (red)
connector and the Audio In left (white) connector on
the back of the PC, if you are using a set-top box
with S-video or composite video output.
Refer to "Front-Panel PC Connectors" on page 5 and
"Back-Panel PC Connectors" on page 6.
You must also connect the Remote Emitter cable if
you are using a set-top box. See "Connecting the
Remote Sensor" on page 16.
example, if you are using two satellite TV sources
they must provide the exact same channels. All TV
viewing and scheduling is provided through the
Television Program Guide in Media Center, so both
TV sources must have identical Television Program
Guides.
The HP Media Center PC records television and
allows you to control the television channels. The HP
Media Center PC has two tuner configurations
available:
A single tuner allows you to watch or record one program only
in NTSC.
You can have dual TV inputs, if your PC includes the two TV tuner
option. You can watch a show on one channel while Media Center
records another show on a different channel. Or you can record two
different programs at the same time.
n
Location and number
of connectors may
vary by model.
Connecting the Television Signal
15