Table of Contents
Advertisement
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address])
• For details on how to select the [Setup] menu settings, refer to (→54).
Select [Wi-Fi Setup] in the [Wi-Fi] menu
Use cursor button to select item, and press [MENU/SET]
Item
[Smart Transfer]
[LUMIX CLUB]
Acquires or changes the
"LUMIX CLUB" login ID.
[PC Connection]
You can set the workgroup.
[Device Name]
You can change the name of
this unit.
[External AV device]
Images can be sent to the
AV device of relatives and
acquaintances via "LUMIX
CLUB".
[NFC Operation]
Sets whether the NFC function
is activated or not.
• For details (→238).
• For details (→243).
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to "WORKGROUP")
[Change Workgroup Name]:
Enter the workgroup of the connecting computer.
[Restore to Default]: Restore default settings.
• Refer to "Entering Text"
• To use with a computer of the standard settings, you do not have
to change the workgroup.
Press [DISP.] button
Enter the desired device name
• Refer to "Entering Text"
text.
• Up to 32 characters can be entered for [A], [a], [1], and [&].
• For details (→249).
[ON]
[OFF] ( The NFC function does not work even if smartphones are
placed to the side of the unit)
- 251 -
Description
(→114)
for information on how to enter text.
(→114)
for information on how to enter
VQT4T08
Advertisement
Table of Contents
