Panasonic DMC-ZS30W Owner's Manual page 170

GPS and map functions
■
Using "GPS Assist Tool" by connecting the camera and computer
Preparation:
Turn on the computer and close all other open application programs.
Select [Assist Data] from GPS menu and press [MENU/SET]
Use cursor button to select [Update] and press [MENU/SET]
Use cursor button to select [Connect USB] and press
[MENU/SET]
Connect the camera to a computer
[Access] (sending data)
• Do not disconnect
the USB connection
cable (supplied) while
[Access] is displayed.
Start up the "GPS Assist Tool" on your computer and update
the GPS assist data
The GPS assist data of the camera is updated.
Terminate the connection between the camera and computer
and disconnect the USB connection cable (supplied)
●
You can also update the assist data if you select [GPS assist data] for [USB Mode]
(→64) when you connect the camera to a computer.
●
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (optional). Using cables other than the above may
cause a malfunction.
DMC-ZS30
USB connection cable (supplied)
(→172)
- 170 -
Reducing the time required for positioning
Check the socket direction and insert
straight in.
(If the cable is inserted in the wrong
direction, the socket could become
deformed and cause faulty operation)
VQT4T08