Panasonic DMC-ZS30W Owner's Manual page 278

Owner’s manual for advanced features
Hide thumbs Also See for DMC-ZS30W:
Table of Contents

Advertisement

Others
[Memory card parameter error]
Card is not of SD standard.
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
[Read Error] / [Write Error]
Data read has failed.
→ Check whether card has been inserted correctly (→22).
Data write has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
Card may possibly be damaged.
Try with a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
Format the card after saving necessary data on a PC etc.
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
If recording stops even when using a card of the recommended speed class (→23), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→66).
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera.
Folder number is reset to 100 when performing [No.Reset] (→63).
[Picture is displayed for 16:9 TV]
AV cable (optional) is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV Aspect] (→64).
USB connection cable (supplied) is only connected to camera.
→ Message disappears when cable is also connected to another device.
[This battery cannot be used]
Use a genuine Panasonic battery.
Battery cannot be recognized as terminal is dirty.
→ Wipe any dirt away from the battery terminal.
[GPS feature is not available in this region.]
GPS may not work in China or in the border regions of countries neighboring China. (Current as of
January 2013)
[Recording failed.]
Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the
subject lacks contrast.
[Please check the card]
[Picture is displayed for 4:3 TV]
DMC-ZS30
- 278 -
(→66)
Message displays
(→66)
VQT4T08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-zs30kDmc-zs30sLumix dmc-zs27Lumix dmc-zs30

Table of Contents