Table of Contents
Advertisement
GPS and map functions
■
Interval between positioning operations
Even if the positioning information is not updated, the camera automatically tries
to execute positioning immediately after it is turned on and subsequently at regular
intervals when [GPS Setting] is [ON].
Also, when [Airplane Mode] is set to [OFF], the camera automatically tries to execute
positioning, even if the camera is turned off.
Note, however, that the positioning operation is interrupted in the following cases.
• When the battery power is low and
• When the battery charging is started.
• When the camera has not been turned on for a certain period of time.
■
Displaying the GPS reception status
Select [GPS Setting] from the [GPS] menu: Perform steps
Use cursor button to select [INFO] and press [MENU/SET]
• Press [MENU/SET] again to update the positioning information.
• Checking GPS reception status
: Time when positioning is executed
: Number of GPS satellites from which the camera has received signals
: Latitude
Longitude
DMC-ZS30
Using the GPS function to record the location of a picture
is displayed.
- 163 -
and
(→159)
VQT4T08
Advertisement
Table of Contents
