Panasonic DMC-ZS30 Wi-Fi Connection Manual

Digital Camera
Model No. DMC-ZS30 / DMC-ZS27
Wi-Fi ® connection guide
Linking with the Wi-Fi compatible equipment allows you to remotely
operate the camera, or share pictures with people in distant places even
during recording or playing back.
You can remotely operate the camera
using a smartphone/tablet. You need to
install "Image App" on your smartphone/
tablet.
[Remote Shooting]
By linking with the DLNA compatible TV,
you can display pictures on TV right after
taking them or display them on TV later by
playing them back on the camera.
[Playback on TV]
Every time you take a picture, the picture
can be automatically sent to a specified
location. You can play back the picture on
the smartphone/tablet, or save and edit it
on PC.
[Send Images While Recording]
You can select and send recorded
images.
[Send Images Stored in the Camera]
Recording/viewing pictures with a smartphone/tablet [Remote Shooting]
This section describes how to make a Wi-Fi connection between this unit
and a smartphone/tablet to record pictures using the smartphone/tablet
and to transfer pictures to the smartphone/tablet.
1
Installing "Image App"
The "Panasonic Image App" is an application provided by Panasonic that
allows your smartphone/tablet to perform the following operations of a
Wi-Fi-compatible LUMIX. ("Panasonic Image App" is indicated as "Image
App" in the text.)
■
Version
1.2 or above
■
Supported OS
Android 2.2 - Android 4.2
iOS 4.3 - iOS 6.0
■
Installation procedure
Connect your smartphone/tablet to the Internet, and
please install "Image App" from the following site.
• "Google Play™ Store" (for Android)
• "App Store SM " (for iOS)
In the search field of each site, search by entering
"Image App" to find it quickly.
●
The service may not be able to be used properly depending on the
type of smartphone/tablet being used. For compatible devices,
see the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)
●
Android and Google Play are trademarks or registered trademarks of
Google Inc.
●
App Store is a service mark of Apple Inc.
For details, refer to "Owner's Manual for advanced features".
The camera cannot be used to connect to a public wireless LAN
connection.
VQC9313
■
About the Wi-Fi connection lamp
Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data
●
We strongly recommend that you set an encryption to maintain
information security.
●
When sending images on a mobile network, high packet
communication fees may be incurred depending on the details of your
contract.
●
Do not remove the memory card or battery or move to an area
without any reception while sending images.
●
"Wi-Fi", "Wi-Fi Protected Setup", "Wi-Fi Direct", "WPA" and "WPA2" are
marks or registered marks of the Wi-Fi Alliance.
[Airplane Mode]
Electromagnetic waves from the camera can affect instruments and
meters. In airplane cabins or in other restricted areas, set [Airplane
Mode] to [ON].
Press [MENU/SET]
Press to select [Setup] and press [MENU/SET]
Press to select [Airplane Mode] and press [MENU/SET]
Press to select [ON] and press [MENU/SET]
2
Easily connect to a smartphone/tablet
Use the NFC (Near Field Communication) function to easily connect this
unit to a smartphone/tablet with Wi-Fi for remote recording and to send
pictures to the smartphone/tablet.
• This function can be used with NFC compatible devices with Android
(2.3.3 or above). (Not available in certain models)
1 Start up "Image App" on your smartphone/tablet
Place your smartphone/tablet to the side of this
2
unit
Place over this area
(within 5 mm (0.20 inch))
• Do not bump your smartphone/tablet strongly against this unit.
(The smartphone/tablet or this unit may get scratched)
• For information on how to use NFC compatible devices, please
contact the device manufacturer.
• If there is no immediate reaction, slightly move the position where
the smatphone/tablet was placed.
3
Press to select [Yes] and press [MENU/SET]
Place your smartphone/tablet over this area of the
4
unit again
• When the connection is complete, live images captured by the
camera will be displayed on your smartphone/tablet.
• Smartphone/tablet that have already been approved to connect
can connect by performing the operations in step

Sequence of connecting operation

The operation to connect this unit to other devices by Wi-Fi differs by function, connection method, etc. Perform operation by following the screen display and
refer to the manual, etc. for the connecting device or WEB service.
Preparation: You may be required to configure settings on applicable devices depending on the connecting device or WEB service.
1
Press [Wi-Fi] button
through the Wi-Fi connection
Press
2
select the item and
press [MENU/SET]
[New Connection]: Configure settings for a new Wi-Fi connection with Wi-Fi compatible devices or WEB services. ([Remote Shooting] / [Playback
on TV] / [Send Images While Recording] / [Send Images Stored in the Camera])
[Select a destination from History]: Connect to compatible devices or WEB services using the same setting as before when connecting with Wi-Fi.
[Select a destination from Favorite]: You can register frequently used connection settings.
[Wi-Fi Setup]: Configure various Wi-Fi settings.
3
Connect to Wi-Fi
Camera
[Remote Shooting] (see below)
When manually connecting without the NFC function
■
Operating this unit
Press the [Wi-Fi] button
Use to select [New Connection] and press
[MENU/SET]
Use to select [Remote Shooting] and press [MENU/SET]
■
On your smartphone/tablet
Select the SSID displayed on the camera, and enter the
password
• The SSID displayed differs depending on the connection
method.
• To connect [Via Network], select a wireless access point and
adjust the settings.
Start up "Image App"
• When the connection is complete, live images captured by the
camera will be displayed on the "Image App" screen.
Transferring a still picture easily to your smartphone/tablet
When transferring just 1 still picture to your smartphone/tablet with "Image App" installed, you can use the NFC function to easily send the picture.
Start up "Image App" on your smartphone/
tablet
1 and 2 .
to
Smartphone/ Wireless access Compatible devices, etc.,
Camera
tablet point
[Via Network] (see reverse side)
3
■
Taking pictures via a smartphone/tablet
(remote recording)
Select [
■
Playing back pictures in the camera
Select [
●
Read the [Help] in the "Image App" menu for further details on how to
operate.
●
The screen differs depending on the operating system.
Display the still picture to be transferred
to your smartphone/tablet on the 1-picture
screen (full screen)
• You can also select it by touch
operations.
Wi-Fi compatible
Camera
on network devices
[Direct] (see reverse side)
Taking pictures / Playing back pictures
] on a smartphone/tablet
] on a smartphone/tablet
Place your smartphone/tablet to the side of
this unit