Connecting Via A Wireless Access Point; When Connecting With; [Wps (Push-Button)] - Panasonic DMC-ZS30W Owner's Manual

Wi-Fi

Connecting via a wireless access point

This section describes how to use the Wi-Fi connection to connect to compatible devices
and other equipment via a wireless access point.
Camera
Use cursor button to select [Via Network] in the connection
method settings screen, and then press [MENU/SET]
Use cursor button to select connection method, and then
press [MENU/SET]
Connection method
*

[WPS (Push-Button)]

*
[WPS (PIN code)]
[Manual Connection]
*
WPS refers to a function that allows you to easily configure the settings related to the connection
and security of wireless LAN devices. To check if the wireless access point you are using is
compatible with WPS, refer to the manual of the wireless access point.
When connecting with [WPS (Push-Button)]
Press the wireless access point WPS button until it switches
to WPS Mode
• Refer to the wireless access point instruction manual for details.
Wireless access point
Save push button type wireless access point that is
compatible with Wi-Fi Protected Setup™ with a WPS mark.
Save PIN code type wireless access point that is compatible
with Wi-Fi Protected Setup with a WPS mark.
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect to
a wireless access point.
- 205 -
Compatible devices, etc.,
on network
Description
(→205)
(→206)
(→206)
VQT4T08