When Sending Images To Av Device - Panasonic DMC-ZS30W Owner's Manual

Wi-Fi

When sending images to AV device

Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
• Read the operating instructions of your device for details.
When sending images to [External], the following are required:
• Registration to "LUMIX CLUB".
• Address number and access number acquired by the destination External AV device.
(→249)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press
[MENU/SET]
• You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the
Camera], and then press [MENU/SET]
Use cursor button to select [AV device], and then press
[MENU/SET]
Use cursor button to select [Home] or [External], and then
press [MENU/SET]
Use cursor button to select connection method, and then
press [MENU/SET]
[Via Network]
[Direct]
• Only when [Home]
is selected
(→243)
When you want to connect to an AV device via a wireless access
point. (→205)
When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].
- 233 -
Send Images Stored in the Camera
(→208)
(Continued on the next page)
VQT4T08