Sensors (Compass/Altimeter/Barometer) Are Operated - Panasonic DMC-FT6 Basic Operating Instructions Manual

Sensors (compass/altimeter/barometer)
are operated
The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
•
Information measured on this unit is only a rough indication. Do not use it for
technical purposes.
•
When using this unit for full-scale mountain climbing, trekking, or underwater, use the
measured information (direction, altitude, depth, atmospheric pressure) only as a
rough indication, and always carry a map and purpose-built measurement tools.
Press [MENU/SET].
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [Sensor Settings], and then press [MENU/
SET].
Press 3/4 to select [ON], and then
press [MENU/SET].
•
Exit the menu after it is set.
•
To switch the environment information
screen, press [DISP.] several times.
A Compass
16 bearings are measured based on the direction the lens of the camera is pointing in.
•
The coloured portion of the compass needle points north.
B Altimeter
You can check the altitude of the current location.
•
Displaying range is j600 m to 9000 m.
C Barometer
With the current atmospheric pressure as a reference, it is displayed on the graph within
the range of j10 hPa to _10 hPa.
(Atmospheric pressure out of range cannot be displayed in details)
22
SQT0840 (ENG)
A
10
N
0m
B
N
5
0
N 00' 00' 00.00
-5
E 000' 00' 00.00
GPS 10:00
-10
10:00 1.DEC.2015
1013hPa
C
1.DEC
-24H 0
H