Chipset Configuration - Asus P5BV/SAS User Manual

4.4.6

Chipset Configuration

The Chipset Configuration menu allows you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
South Bridge Configuration
NorthBridge Configuration
The NorthBridge Configuration menu allows you to change the Northbridge related
settings.
Advanced
North Bridge Chipset Configuration
Memory Remap Feature
PCI MMIO ALLocation: 4GB To 3584MB
DRAM Frequency
Configure DRAM Timing by SPD
Initiate Graphics Adapter
PEG Port Configuration
PEG Port
Memory Remap Feature [Enabled]
Allows you to remap the overlap PCI memory over the total physical memory.
Configuration options: [Disabled] [Enabled]
Disable this item if you are using RedHat Linux Advanced Server 3.0 UP5/UP6
operating system.
4-20
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Enabled]
[Auto]
[Enabled]
[PEG/PCI]
[Auto]
Configure North Bridge
features
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup