Asus P5BV/SAS User Manual page 147

The Select New Array Type screen apprears.
4.
Use the arrow keys to select Create IS Volume, then press <Enter>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Select New Array Type -- SAS1068
Create IM Volume
disks plus an optional hot spare. Data
Create IME Volume
Array of 3 to 8 disks including an
Create IS Volume
2 to 8 disks.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
The Create New Array screen shows the disks you can add to make up
5.
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Create New Array -- SAS1068
Array Type:
Array Size(MB): 102996
Slot Device Identifier RAID Hot Drive Pred Size
Num Disk Spr Status Fail (MB)
0 SEAGATE ST373454SS
1 SEAGATE ST373454SS
2 SEAGATE ST373454SS
3 SEAGATE ST373454SS
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare C = Create array
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
ASUS P5BV Series
Create Integrated Mirror Array of 2
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
ALL DATA on array disks will be DELETED!
IS
0003 [Yes] [NO] ------- ---- 70007
0003 [NO] [NO] ------- ---- 70007
0003 [Yes] [NO] ------- ---- 35003
0003 [Yes] [NO] ------- ---- 35003
5-49