Internal Connectors - Asus P5BV/SAS User Manual

2.7.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)
This connector is for the provided Floppy Disk Drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other end to
the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
®
P5BV
loppy Disk Drive Connector
P5BV F
ASUS P5BV Series
FLOPPY1
PIN1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
2-23