Asus P5BV/SAS User Manual page 152

4. Use the arrow key to select the disk you would like to configure as hot spare,
then move the cursor to the Hot Spr column. Press <+>, <->, or <Space>.
The Drive Status column field now shows Hot Spare.
Press <C> to commit the changes.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Manage Hot Spare -- SAS1068
Identifier LSILOGICLogical Volume 3000
Type
Scan Order
Size(MB) 51498
Status
Slot Device Identifier Hot Drive Pred Size
Num
0
1
2
3
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Change Item
Synchronizing the array
Synchronizing the array allows the utility to resynchronize data on the mirrored disk
in the array. This procedure is seldom required because data synchronization is
automatically done during normal operation.
To synchronize the array:
Follow steps 1 ~ 3 of the section Viewing volume properties and step 2 of
1.
the section Managing hot spares.
From the Manage Array screen select Synchronize Array, then press
2.
<Enter>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Manage Array -- SAS1068
Identifier LSILOGICLogical Volume 3000
Type
Scan Order
Size(MB) 51498
Status
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
3. Press <Y> to begin the synchronization, or <N> to cancel.
5-54
SEAGATE ST373454SS
SEAGATE ST373454SS 0003 [NO] Ok No 34331
SEAGATE ST373454SS 0003 [NO] Ok No 34331
SEAGATE ST373454SS
[----] --------- -- -----
IME
0
Optimal
Spr Status
0003 [NO] Ok No 34331
0003 [Yes] Hot Spare
C = Commit Changes
IME
0
Optimal
Fail (MB)
No 35003
Chapter 5: RAID configuration