Asus P5BV/SAS User Manual page 141

3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter List
Adapter
SAS1068 05
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Global Properties -/+ = Alter Boot Order
The numbers of the channel depend on the controller.
The Adapter Properties screen appears.
4.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter Properties -- SAS1068
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
The Select New Array Type screen apprears.
5.
Use the arrow keys to select Create IM Volume, then press <Enter>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Select New Array Type -- SAS1068
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
ASUS P5BV Series
Global Properties
PCI PCI PCI PCI
BUS Dev Fnc Slot
03 00 00
Adapter SAS1068
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address 500E0180:60831008
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Create IM Volume Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create IS Volume Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
FW Revision Status
1.15.00.00-IR Disabled
Ins/Del = Alter Boot List
00
05.03.00
1.15.00.00.IR
25.02
Disabled
0
(Enabled BIOS & OS)
Boot
Order
0
5-43