Table of Contents
Advertisement
6.
Serial port connector (10-1 pin COM2-Optional)
This connector is for a serial (COM) port. Connect the serial port module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
®
P5BV
P5BV ATX COM Port Connector
The Serial port module is purchased separately.
7.
CPU fan connector (4-pin CPU_FAN1)
The fan connector supports cooling fan of 350 mA ~ 740 mA (8.88 W max.)
or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the fan cables
to the fan connectors on the motherboard, making sure that the black wire of
each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
®
P5BV
P5BV CPU Fan Connector
ASUS P5BV Series
COM2
PIN 1
CPU_FAN1
FAN PWM
FANPWR1
GND
2-27
Advertisement
Table of Contents
