Asus P5BV/SAS User Manual page 150

The View Existing Array screen appears. Here you can view properties of
3.
the RAID array(s) created. If you have configured a hot spare, it will also be
listed. if you created more than one array, you may view the next array by
pressing <Alt+N>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
View Array -- SAS1068
Identifier LSILOGICLogical Volume 3000
Slot Device Identifier RAID Hot Drive Pred Size
Num
0
2
3
Esc = Exit Menu F1/Shift+1 = Help
Enter=Select Item Alt+N=Next Array C = Create an array
5-52
Array
Type
Scan Order
Size(MB) 51498
Status
Manage Array
Disk Spr Status Fail (MB)
SEAGATE ST373454SS 0003 Yes NO Ok No 34331
SEAGATE ST373454SS 0003 Yes NO Ok No 34331
SEAGATE ST373454SS 0003 Yes NO Ok No 34331
1 of 1
IME
0
Optimal
Chapter 5: RAID configuration