Table of Contents
Advertisement
6.
Repeat step 5 to add the other disks to the volume.
When done, press <C> to create the array, then select Save changes then
7.
exit this menu.
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Configuration Utility and Reboot
9.
The utility creates the array.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Processing...may take up 1 minute
Creating RAID array
5-50
Chapter 5: RAID configuration
Advertisement
Table of Contents
