Table of Contents
Advertisement
5.3.6
Resetting Disks to Non-RAID
Take caution before you reset a RAID volume HDD to non-RAID. Resetting a
RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1.
From the utility main menu, select 3. Reset Disks to Non-RAID, then press
<Enter> to display this screen.
structures,
be lost.
Port Drive Model Serial # Size Status
2.
Use the up/down arrow key to highlight the RAID set drive you want to reset,
then press <Space> to select.
3.
Press <Enter> to reset the RAID set drive. A confirmation message appears.
4.
Press <Y> to reset the drive or press <N> to return to the utility main menu.
5.
Follow steps 2 to 4 to select and reset other RAID set drives.
5.3.7
Exiting the Intel
utility
To exit the utility:
1.
From the utility main menu, select 4. Exit, then press <Enter>. This window
appears.
2.
Press <Y> to exit or press <N> to return to the utility main menu.
5-38
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection
Are you sure you want to exit? (Y/N):
[
RESET RAID DATA
Matrix Storage Manager
®
[
CONFIRM EXIT
]
]
Chapter 5: RAID configuration
Advertisement
Table of Contents
