FO-IS125N
[6] Clearing paper jams
1. Clearing a jammed document
If the original document doesn't feed properly during transmission or
copying, or [DOCUMENT JAMMED] appears in the display, first try
START
pressing
. If the document doesn't feed out, remove it as
explained below.
1) Open the operation panel.
2) Rotate the lever so that it points straight up and pull it up (
Remove the document (
2
1
3) Make sure the left end of the roller is inserted correctly in its holder
(
), and then push the right end of the roller down (
1
rotate the lever back down (
1
2
).
2
1
2
2
).
3
3
4) Close the operation panel, pressing down firmly on both sides to
make sure it clicks into place.
2. Clearing jammed printing paper
1) Open the top cover of the machine.
).
1
•
Caution! The fusing unit inside the print compartment becomes
very hot during operation. Do not touch the inside of the print
compartment after the machine has been in operation.
2) Press the release (
) and
3) Push the two heater roller release levers down to release the
heater roller.
1 – 11
) and open the front cover (
1
2
1
).
2