Sharp FO IS125N - B/W Laser - All-in-One Service Manual page 10

FO-IS125N
2) Press the release ( ) and open the front cover (
1
3) Open the side cover.
4) Remove the new drum cartridge from its packaging.
5) Insert the drum cartridge into the print compartment, sliding it along
the guides.
• Do not touch or allow other objects to contact the drum (the
green cylinder). This may damage the drum. If fingerprints, dust,
or other contaminants get on the drum, wipe it gently with a
clean cloth.
• Exposure to light for more than several minutes will damage the
drum. Be sure to insert the drum cartridge promptly into the
machine.
• If you find it necessary to leave the cartridge out of the machine
for more than several minutes, wrap the cartridge in black
paper.
6) Remove the new toner cartridge from its packaging. Shake the car-
tridge side to side four or five times to distribute the toner evenly
within the cartridge.
).
2
2
1
Grasp this
handle to
push the
cartridge in.
7) Grasp the cartridge handle and insert the toner cartridge into the
print compartment, sliding it along the guides.
Grasp this handle to
insert the cartridge.
• Make sure the cartridge "clicks" into place.
• Do not touch the roller in the toner cartridge.
8) Close the side cover (
cover ( ).
3
1
• Make sure the side cover is completely closed. Otherwise, light
may enter the print compartment and damage the drum.
• The display will show: [TONER EXCHANGED?] / [1 = NEW, 2 =
OLD]
9) If you installed a new toner cartridge, press
(this will reset the toner counter to zero).
• If you temporarily removed and then replaced an old toner car-
tridge for maintenance or other reason,
tinue using the previous toner count. (Note: Be sure to press
or the machine will not alert you when the toner car-
tridge is out of toner.)
START
10)Press .
11)If you installed a new drum cartridge, reset the drum counter as
explained below.
1 – 9
), the front cover ( ), and the top
1 2
3
2
to select NEW
press to con-